do not scale from this print hsec8-1xxx-xx-xx-dv-x-xx no of positions row specification -dv: dual vertical (use hsec8-xxx-01-dv-x) card thickness (see note 6 & 7) plating specification -sm: selective gold/matte tin tail (use c-188-01-s) -h: heavy gold (use c-188-01-h) -s: selective gold/matte tin tail (use c-188-01-s) option -k: polyamide film pad(see fig. 3) (use k-dot-.217-.313-.005) -tr: tape & reel (-10 thru -70 pos only) (leave blank for tray) **-l: latching option. not available for -gr type use (use hsec8-xx-01-dv-a-l) (available in **-13, **-25, **-37 & **-49 positions only) (see sheet 3, fig. 4) **-bl: board lock option. not available for -gr type use (use hsec8-xxx-01-dv-xx-bl) (see sheet 4, fig. 5) **-gr: guide rails not available for -l; -bl type use (see sheet 5, fig. 6) (use hsec8-xxx-01-dv-xx-gr) -a: alignment pins (use hsec8x-xxx-xx-dv-a) (leave blank for no -a & use hsec8x-xxx-xx-dv-lc) option -10, -20, & -30 (see fig. 1) **-13,** -25,** -37,** -40, **-49, -50, & -60 (see fig. 2) -70, -80, -90 & -100 (per row) t (no of pos x 0.800 [.0315]) + 1.40[.055] ref (no of pos x 0.800 [.0315]) + 4.60 [.181] ref "p" ref "t" ref "q" ref 0.800 0.05 .0315 .002 (tol non accum) (no of pos -1 ) x 0.800 [.0315] 2.70 .11 ref "a" "a" 01 59 60 02 c1 c l c2 7.80 .31 ref 3.60 .14 ref 1.12 ref (typ) .04 1.32 ref .05 (2 plcs) (no of pos x 0.800[.0315]) + 2.200[.0866] ref position #1 indicator see table 5 l c 1.50 .06 ref 0.80 0.05 .0315 .002 (tol non accum) ((no of pos -1 ) x 0.800 [.0315]) 0.08[.003] c l c7 c6 7.98 0.15 .314 .006 (typ) "y" 0.20 "v" 0.10 3.03 .12 ref "w" ref section "a"-"a" c-188-01-xx c3 c5 c4 l c c11 see table 1 designed & dimensioned in millimeters (inches for reference only) fig. 1 for positions -10, -20 & -30 (shown: hsec8-130-01-xx-d-dv-a) c (* = not released for production) (** = available only with -01 card thickness) sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles .x: .3 [.01] 2 .xx: .13 [.005] .xxx: .051 [.0020] material: 0.8mm high speed assembly by: hsec8-1xxx-xx-xx-dv-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/24/03 5 1 sheet scale: 2.5:1 insulator: lcp, color: -01 lead style black, -02 thu -04 lead styles natural contact: becu f:\dwg\misc\mktg\hsec8-1xxx-xx-xx-dv-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: 0.04[.0015] max. 3. minimum pushout force: 2.2 newtons. 4. all tail to tail dimensions measured tip to tip. 5. assemblies to be packaged in trays. 6. card thickness option -01:1.57mm[.062] thick card use hsec8-xxx-01-dv-xx *-02: 2.00mm[.079] thick card use hsec8a-xxx-02-dv-xx for positions 10, 20, 30, 40, 50 and 60 only. *-03: 2.36mm[.093] thick card use hsec8a-xxx-03-dv-xx for positions 10, 20, 30, 40, 50 and 60 only. *-04: 3.18mm[.125] thick card use hsec8a-xxx-04-dv-xx for positions 10, 20, 30, 40, 50 and 60 only. 7. mating edge card thickness tolerance to be +/-0.15[.006]. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision t
(no of pos x 0.800[.0315]) + 7.80[.307] ref "d" ref 0.800 .0315 (tol non-accum) "b" spaces @ .800 = "c" 4.00 .16 (no of pos + 3) x 0.800[.0315] 2.70 .11 ref 01 02 119 120 c9 c10 c8 ((no of pos + 6) x 0.800[.0315]) + 0.60[.024] ref c l "r" "k" "s" "h" fig. 3 -k option (use k-dot-.217-.313-.005 ) 13.83 0.15 .54 .006 "u" 0.13 for positions **-13, **-25, **-37, -40, **-49, -50, -60, -70, -80, -90, -100 (same as fig. 1, unless otherwise stated) (shown: hsec8-160-01-xx-dv-a) fig. 2 in-process (** = available only with -01 card thickness) sheet of 0.8mm high speed assembly by: hsec8-1xxx-xx-xx-dv-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/24/03 5 2 sheet scale: 2.25:1 revision t f:\dwg\misc\mktg\hsec8-1xxx-xx-xx-dv-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
(no of pos x 0.80[.0315]) + 18.40[.724] ref "c" "c" "d" "d" hsec8-xx-01-dv-a-l 5.19 .20 1.59 .06 (no of pos x 0.80[.0315]) + 14.90[.587] 2 max sway (either direction) section "c"-"c" **-l: latching option available in -13, -25, -37 & -49 positions only not available for -gr type use (same as fig. 2, unless otherwise stated) (shown: hsec8-137-01-xx-dv-a-l) (** = available only with -01 card thickness) fig. 4 c11 c13 7.74 ref .30 0.64 ref .03 section "d"-"d" wt-25-02-t sheet of 0.8mm high speed assembly by: hsec8-1xxx-xx-xx-dv-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/24/03 5 3 sheet scale: 3:1 f:\dwg\misc\mktg\hsec8-1xxx-xx-xx-dv-x-xx-mkt.slddrw revision t 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"e" ref "e" "e" "f" "f" "h" "h" 7.74 .30 ref 0.64 .03 ref 1.50 .06 section "h"-"h" wt-25-02-t c14 section "f"-"f" scale 2.5 : 1 2.10 - 0.8 + 0.5 .083 - .03 + .02 12.04 .47 ref 1.33 0.5 .05 .020 "f" 2 max sway (either direction) section "e"-"e" scale 2.5 : 1 hsec8-xxx-01-dv-xx-bl ltc-04 c12 c13 **-bl: board lock option not available for -gr type use (same as fig. 2, unless otherwise stated) (shown: hsec8-160-01-xx-dv-a-bl) (** = available only with -01 card thickness) fig. 5 sheet of 0.8mm high speed assembly by: hsec8-1xxx-xx-xx-dv-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/24/03 5 4 sheet scale: 2.5:1 f:\dwg\misc\mktg\hsec8-1xxx-xx-xx-dv-x-xx-mkt.slddrw revision t 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
2.30 ref .091 11.75 ref .463 "j" "j" 0.70 ref .028 4.40 .173 ref 4.60 .181 ref 1.75 ref .069 section "j"-"j" fig. 6 **-gr: guide rails option available in -10, -20, -30, -40,-50, & -60 positions only not available for -l; -bl type use (same as fig. 2, unless otherwise stated) (shown: hsec8-160-01-xx-dv-a-gr) (** = available only with -01 card thickness) t sheet of 0.8mm high speed assembly by: hsec8-1xxx-xx-xx-dv-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/24/03 5 5 sheet scale: 2:1 revision t f:\dwg\misc\mktg\hsec8-1xxx-xx-xx-dv-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
